![]() Hit -> key and enable encryption if you use WEP or WPA. We will be using some handy software for this. #The word of "Default" must not be removedĨ- Now to connect. # for more information refer to the Readme file. # 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES" # 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE" # 3.) set SSID for connecting to your Accss-point. # 2.) set Channel to "0" for auto-select on Infrastructure mode # 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure "sudo make, sudo make install, sudo nano" are good examples.ġ- Do sudo dmesg right after plugging in your usb wifi dongleĬode: Select all # Use "nano RT2870STA.dat" to modify settings according to your need. Also make sure to type sudo before every command you may think needs root privileges. I have provided the file NEEDED to get it working. ![]() Ralink Support is now available.īefore you begin, read through this, as it provides some useful information. I've found that sudo apt-get update breaks the wifi. The rt2x00 team, and the original Ralink rt2800sta team. Turns out Ralink wifi adapters have 2 dev teams. Now I'm putting this here so someone else doesnt have to go through this torture. It didnt work.įor 2 weeks I tried to fix it, and I FINALLY fixed it. ![]() I recently bought a Ralink USB wifi dongle wireless n 150Mbps from ebay and plugged it into my pi.
0 Comments
Leave a Reply. |